Congratulations, Maggi & Ken!

Beautifully simple, and made to the wearer's specifications!

These lovely fine silver flowers are antiques, from earrings that her grandmother wore. They get a modern update here, and create an elegant pendant!

A beautifully modern family birthstone necklace! I love the angles and asymmetry of this piece.

I love this piece! The birthstones (sapphire, peridot, amethyst, and emerald) represent each member of the family, and are accented by gold leaves and diamonds.

This is such a romantic engagement ring! It features engraving (in French!) on both the inside and outside of the ring, and a sparkling champagne diamond.

This ring was made for a special Christmas present! I love the combination of metals with the bright blue of the topaz.

Using the gold and stones from inherited family jewelry, this new pendant retains the sentimental value of the former pieces. Ruby, garnet, moissanites, and diamonds sparkle from sterling silver, 14k yellow gold, and 14k white gold petals.

Created with an actual branch, this pendant is cast sterling silver, adorned with enameled fine silver flowers. The pendant is about 1 1/2" long, and hangs from an 18" .9mm sterling silver snake chain.

The flowers are attached to the stem with tiny screws. While they remain permanently attached, the flowers are able to spin a little bit. This way, rather than bending and possibly cracking if they were attached solidly, the flowers can move if bumped instead.

Price:

$180

Bright enameled fine silver flowers adorn this one-of-a kind sterling silver branch necklace. It's about 16" long, hanging just below the collarbone on doubled cable chain.

The flowers are attached to the stem with tiny screws. While they remain permanently attached, the flowers are able to spin a little bit. This way, rather than bending and possibly cracking if they were attached solidly, the flowers can move if bumped instead.

Price:

$250

Three fine silver & enameled flowers bloom atop the sterling silver branch pendant. Cast from a real branch, this necklace is a one of a kind! Since the pendant is about 3" long, I've placed it on a 16" chain.

The flowers are attached to the stem with tiny screws. While they remain permanently attached, the flowers are able to spin a little bit. This way, rather than bending and possibly cracking if they were attached solidly, the flowers can move if bumped instead.

Price:

$210

One-of-a-kind, and one of my personal favorites! This necklace is about 16" long, hanging just under the collarbone on doubled cable chains. The branch is solid sterling silver, and was cast from an actual branch. The three flowers are fine silver, with a shimmery texture underneath the transparent enamel.

The flowers are attached to the branch with small screws. While permanently attached, they are still able to spin--they're less likely to bend and crack if the flowers are able to move a little.

Price:

$275

This gorgeous Ceylon blue sapphire looks beautiful set in it's wide band and scroll work. Congratulations to Jake and his bride-to-be!

The groom-to-be picked out the branch and diamond himself, and did a great job! The diamond looks beautiful, classically set atop the textured pine branch band. Congratulations to Brady and his new fiancee!

Genoa found this gorgeous blue topaz trillion stone, and we designed the rest of the ring around it! It's accented by two diamonds given to her by her mother, and two lab grown moissanites.

Congratulations, Genoa and Greg!!

The band of this ring was cast from a pine tree twig, and the setting made to look like the top of a pine cone. The mix of metals with the champagne diamond is gorgeous!

I love the story of this wedding ring: After I finished designing it, her fiance emailed me secretly to have it ready earlier than originally planned. He was then able to surprise her with it! Secrets like that are fun to keep, and even more so later when you hear the whole story Congratulations to Heather and Scott!

Click here to see her coordinating engagement ring!

The 5th of my annual holiday ornaments! This year, I drew each tree in pencil on the enamel, firing the graphite into the enamel's surface. No two are completely alike! Limited edition of 30.

Price:

$25

Designed to show the couple's love of music, this ring was made to echo the shape of a bass clef. Small leaves and vines blend in with the clef beautifully, creating a truly unique ring.
Congratulations!

Dee's favorite colors look gorgeous together--this was such a fun ring to make!
Congratulations, Dee and Brendan!

Set with family diamonds and her birthstone, this ring makes a beautiful memento!

I reworked her original engagement ring into a brand new set of rings! Congratulations, Amanda & John!

A one of a kind ring for a one of a kind Max!

This set was custom made to be given as a surprise birthday present. The coordinating shades of blue topaz and simple bracelet make a beautiful set, versatile enough to be worn together or alone.

This necklace and earring set was created with the remaining family diamonds after making Jess' wedding band, in her favorite shades of green.

Made with stones from her grandmother's gorgeous vintage costume jewelry, this piece was made to welcome a new sister-in-law to the family!

Made to wear with her ivory strapless dress, the warm bronze of the branches and cast berries will coordinate beautifully!

One of my favorite couples ever! So much fun to work with. Her ring interlocks with her engagement ring, and his "wizard ring" is one of my favorite men's bands to date! It features a doubled platinum branch band, with another 14k rose gold branch accent laser welded in the center.

Congratulations, Alex & Danny!

Her band is set with 5 family diamonds, and his features my favorite watery, hammered texture. Be sure to check out the necklace and earring set I made for Jess to wear in the wedding, with the remaining family diamonds!

Congratulations, Mike and Jess!

Set with his grandmother's diamond, this leafy engagement ring is stunning on her finger. It was great fun to make, and they were such a lovely couple to work with. Congratulations on your engagement, Laura and Jonathan!

His band features a subtle feather print, and her doubled twig band curves beautifully around her engagement ring .

Congratulations, Julia & John!!

A budding platinum branch with vines and leaves are a beautiful base for his Grandmother's diamond! Designing this ring was easy, as he was quite sure of what she would like best. A few sketches later, and this was the result!

Check out the picture of Heather wearing her ring on here blog, here: http://www.thedeepolddesk.com/journal/2011/7/19/i-raised-my-hand-as-if-to-show-you-that-i-was-yours.html

Congratulations, Heather & Scott!

Bright and light pinks combine to make this summery pendant. Hangs on an 18" sterling silver snake chain.

Price:

$180

The warm olive green really complements the cream color nicely. Great for an ivory wedding dress, or with your favorite spring and summer dresses. Hangs on an 18" sterling silver snake chain.

Price:

$180

This lovely shade of blue is my new favorite--I have to stop myself from making everything this color! It looks great with the teal on this sterling silver version of the Wreath pendant. Hangs on an 18" sterling silver snake chain.

Price:

Sold

Beautiful for a wedding or with your favorite spring and summer clothes. One-of-a-kind in bright white and teal! About 17" long.

Price:

$250

I really like the combination of pinks and olive green in this one-of-a-kind necklace.

Price:

$250

My favorite in this collection, one-of-a-kind with a solid sterling silver branch with 3 light lavender and yellow flowers. About 17" in length.

Price:

$275

One-of-a-kind solid sterling silver branch, with bright blue and teal enameled flowers! About 17" in length.

Price:

$250

My favorite of the Blooming Branch necklaces with stones--a light green peridot paired with a single Cherry Blossom. About 17" in length

Price:

$100

My favorite branch (featured in my Branch collection and earrings as well) with a lovely lavender freshwater pearl. About 17" in length

Price:

$100

My favorite branch (featured in my Branch collection and earrings as well) with a velvety dark green freshwater pearl and single sterling Bloom. About 17" in length.

Price:

$100

I've wanted to make one of these for a long time--and I love it as much as I thought I would! A full collar made from my favorite branch, with 3 bright blue apatites at the front. The necklace is about 18" long in total length.

Price:

$175

A little shorter, but just as much of a statement. Bright pink tourmalines look great with the bronze! About 2" in length.

Price:

$45

Shorter, but still with plenty of branch-y goodness! Bright green tourmalines complete the look. About 2" in length.

Price:

$45

Lovely long branch, with a pink and green tourmaline to match the earrings! Pendant is about 2 1/2" long, on an 18" sterling silver snake chain.

Price:

$48

My favorite branch cast in bronze, with pink and green tourmaline chips! About 3" in length.

Price:

$54

My favorite branch (featured in my Branch collection and earrings as well), this time adorned with a luminous freshwater pearl and single sterling Bloom. A;sp about 17" in length.

Price:

$100

My favorite branch (featured in my Branch collection and earrings as well) with a sparkling amethyst and single sterling Bloom. About 17" in length, and available at Craftland!

Price:

$100

I wanted to see if a spiraling branch could be cast, and it could! One-of-a-kind and adorned with three of my Blooms. About 17" in length.

Price:

$150

A one-of-a-kind necklace featuring a stripe-textured branch and twin Cherry Blossom silver flowers. About 17" in length.

Price:

$150

Lovely, delicate and one-of-a-kind, this thin twig features a single Bloom. About 17" in length.

Price:

$100

One-of-a-kind and another of my favorites from this latest batch of Blooming Branches, I added just a single Bloom to this beautiful Branch! About 17" in length.

Price:

$150

A simpler branch was cast for this one-of-a-kind necklace, but it's lovely just the same with the addition of one of each of my Bloom and Cherry Blossom sterling silver flowers. About 17" in length.

Price:

$150

The texture of these leaf buds are amazing! This necklace is one-of-a-kind, and hangs about 17" long.

Price:

$150

This one-of-a-kind necklace is one of my favorites in this latest batch, and available at Craftland

Price:

$150

This branch was so lovely on it's own, it only needs one Cherry Blossom to adorn it. One-of-a-kind, and available at Cambridge Artist's Cooperative Gallery! It's about 17" in length.

Price:

$150

This necklace is one-of-a-kind, and available at Craftland! Bronze and beautifully textured, with one each of my Bloom and Cherry Blossom sterling flowers. About 17" in length.

Price:

$150

Beautiful buds and a left-pointing branch, adorned with a single Cherry Blossom sterling silver flower. One-of-a-kind and about 17" in length, resting just below the collarbone.

Price:

$150

One-of-a-kind, this Blooming Branch has beautifully textured buds, and one each of my Bloom and Cherry Blossom sterling flowers! It's about 17" in length, resting just below the collarbone.

Price:

$150

This is a one-of-a-kind necklace, featuring 1 each of my Bloom and Cherry Blossom sterling silver flowers atop a budding bronze twig! The necklace is about 17" long, resting just below the collarbone.

Price:

$150

A teardrop shaped bronze twig, adorned with my Bloom and Cherry Blossom sterling silver flowers! Worn on 18" sterling silver snake chains.

These are also available at Craftland and Cambridge Artist's Cooperative! See the Shop page for details.

Price:

$85

Thinner than the original pair I made, these delicate twigs became gorgeous hoop earrings!

Also available in bronze ($50).

Price:

$75

Thinner and more delicate, these hoops are sure to become your everyday favorites! The shimmery surface of the silver flower contrasts beautifully with the natural texture of the bronze branch underneath.

Also available without the flowers in bronze ($50) and sterling silver ($75).

These earrings are also available at Craftland and Cambridge Artist's Cooperative! See the Shop page for details.

Price:

$74

These Bloom earrings were custom made for a bride's bridesmaids. They are the same lovely shimmery flowers that are featured in my Bloom stud earrings, but in a fun dangling style. I like them so much, I'm thinking about putting them into production for the holiday season this year!

Congratulations, Leslie!

Price:

$50

This necklace features the birthstones of the couple's children, set back-to-back to appear like beads. It's worn in a lariat style, with a toggle clasp at the front.

Sometimes all you need is a beautiful and simple wedding band.

This is one of my favorite hammered textures! Here the bride and groom have a matching set.

This ring was inspired by the wearer's work in Norse archaeology. The interlocking rings encircle a beautiful ruby solitaire.

These wedding bands were made to fit and coordinate with Megan's engagement ring. The small snake on the top of Megan's band tucks his head perfectly next to the ruby, and Kelvin has the option of wearing the ring with the snake at the top, or underneath like on her engagement rings.

A snake biting it's tail has long been a symbol of eternity, and was a popular motif for engagement and wedding rings during the Victorian age in England.

Congratulations, Megan & Kelvin!

Jeremy, a talented furniture designer, designed these earrings to give to his wife for their anniversary. He was great to work with, the earrings were a pleasure to make!

I loved making this Art Nouveau-inspired ring!
Congratulations, Cuppy and Ryan!

A simple and lovely new ring for my Aunt Grace!

This is definitely one of the most unique (and fun to make) engagement ring I've ever done! Inspired by a pine cone that the couple found together on their first date, it was a fun challenge to come up with a design that didn't look like a flower.
Congratulations to Robert and his fiancee!

This is one of the most stunning stones I've designed a ring around--Patrice's fiance, Greg, did a great job finding her the perfect one.
Congratulations, Patrice and Greg!

Inspired by Sara's Moonstone Engagement Ring after seeing the Muppet Proposal, I made Elisia her very own Art Deco-inspired ring. Congratulations, Elisia!

Like their silver cousins in my Branch collection, but with the addition of a beautiful little silver flower, on the rich golden brown of bronze.

Price:

$84

Forsythia yellow and just as lovely, these drop earrings will perk up any outfit! Long and dramatic, they measure about 3" in total length.

Price:

Sold

I love this color combination of rich golden bronze with pink and green tourmalines!

Price:

sold

One of a kind, and another one of my favorites--three little Bloom flowers, on a delicate bronze twig.

Price:

sold

Elegant and simple, with just one sterling silver flower.

Price:

sold

More dainty than my other Blooming Branch pieces, but still one of kind! The pendant hangs on a 16" sterling silver cable chain.

Price:

sold

Short and sweet, another one of a kind pair in this lovely shade of purple.

Price:

$120

Get ready for spring! Two pairs, each with different petal shapes, are available in this style and color.

Price:

$120

A shorter version of my long Branch earrings, with gorgeous dark green tourmaline beads.

Though not one of a kind, like the necklaces in this collection, these are a fun addition to the Cherry Blossom and Blooming Branch family!

Price:

$74

A rich, antique golden brown--a lovely new color option for my popular Lace stud earrings!

Price:

$32

Elegant and modern, in a color perfect for Spring!

Price:

$120

Light, bright blue enameled petals swing on 2 3/4" silver stems, with matching aquamarine beads.

Price:

Sold

One of a kind, this Blooming Branch is my favorite to date. The graceful curves of the branch are perfect for my silver flowers!

Price:

sold

Though not one of a kind (as the necklaces in this collection are) these earrings are beautifully unique. The rich brown bronze looks like a real twig, highlighting the bright white sterling silver flower.

Price:

$84

Rich bronze branches with rough amethyst beads on sterling silver ear wires.

Price:

$54

These charms were made for a Valentine's day present: charms in the initials of their daughter and son!

After I was unable to size down Kim's original wedding band (due to the spacing of the diamonds and the twist-y nature of the design), I came up with this new coordinating band instead. Now Kim can wear the diamond band on her right hand, and this new band with her engagement ring!

I'd like to thank Kim again for being so wonderful to work with, she was so patient and understanding throughout the entire process! Thank you, Kim

This sterling rosette is set with a crystal clear white topaz, making it ideal for matching nearly anything in your flower lover's wardrobe. The pendant is about an inch long, 1 1/2" wide, and hangs on an 18" cable chain.

Price:

$85

I've had these silver lace rosettes for ages, and was never sure of what to do with them. Then I realized they're perfect Valentine's Day roses, since they'll never whither. The pendant is about an inch long and 1 1/2" wide, hanging from an 18" cable chain.

Price:

$85

Is it a heart? A butterfly wing? A flower petal? Or just a pretty piece of sterling silver lace, adorned with a 6mm white topaz? This pendant is about 1 1/2" in length, on an 18" cable chain.

Price:

$75

A gorgeous cluster of 3 lacy leaf shapes, set off by a bright purple 5mm amethyst at the top. The pendant is about 2" wide, and hangs from an 18" cable chain.

Price:

$135

A deep red 5mm garnet sits atop this sterling silver lace pendant. The pendant is about an inch in total length, on an 18" cable chain.

Price:

$65

One of my favorite rings to date, for one of my favorite people!